hdc-logo1.gif (2954 bytes)

Auctioneers & Appraisers
(800) 775-2289, (412) 765-1170, Fax (412) 765-0910
1725 Boulevard of the Allies, Pittsburgh, PA 15219 USA

Refractory & Bulk Materials Processing

TYK America, Inc
Off Route 53, IRVONA, PA 16656

Thursday, March 1, 2007 at 10:00 am

E-Mail: sales@harrydavis.com | HOME | PDF of Mailer | Auction CATALOG | Bidspotter ONLINE BIDDING

 

WHO:
TYK America, Inc., Irvona, PA (Plant manufactured Alumnia Graphite Long Nozzles, Long & Immersion Nozzles and Long Stoppers.)

WHAT:
A Harry Davis & Company public auction sale of Refractory, Bulk Materials Processing and Support items and a large quantity of metal salvage material.

WHEN:
THURSDAY MARCH 1, 2007 at 10 a.m.

WHERE:
Off Route 53, Irvona, Clearfield County, PA 16656 (near Altoona, PA)

[ Yahoo! Maps ]  Map of Irvona, PA

Directions: Rt. 22 east to Rt. 53 (Cresson exit) north approximately 30 miles to Irvona. Immediate left past bridge at Irvona. Watch for Auction Arrows.

INSPECTION:
February 28 or by appointment, Call 814-672-5306 or Auctioneer at (800) 775-2289.

TERMS:
A 10% BUYER’S PREMIUM APPLIES TO ALL SALES.

Full payment day of sale in guaranteed or certified U.S FUNDS. Company check accepted with letter of approval from your bank. Direct wire transfers to the account of Harry Davis & Company accepted ONLY with prior arrangement. You are urged to inspect before the sale.  Although information has been obtained from reliable sources, the Auctioneer makes no warranty or guarantee, express or implied as to the the accuracy of information in this brochure. Additional terms to be announced at sale. Click here for additional terms of sale. Absentee bidding also available, click here for details.  Martin I Davis Auctioneer PA Auctioneer AU1458-L; Stanford G. Davis PA Auctioneer #3301-L.


atlan035.jpg (13805 bytes)

ONLINE BIDDING
will be available through Bidspotter.

DOWNLOADSAbsentee Bidding Form | Bank Letter of Approval | Wire Transfer Form | Bidspotter ONLINE BIDDING

 

  tyk15.jpg (178562 bytes)  tyk14.jpg (280910 bytes)  tyk5.jpg (173494 bytes)  tyk23.jpg (180660 bytes)  tyk21.jpg (172839 bytes)  tyk19.jpg (178433 bytes)

ABB Isostatic Press System (3 photos) - RM Roll Crusher & Screening System
Kato 40' Skip Hoist Elevator w/Mixer, Reactor & Dust Collector - (3) Hot Mix Mixers

tyk18.jpg (171954 bytes)  tyk16.jpg (180464 bytes)  tyk13.jpg (192955 bytes)  tyk11.jpg (180636 bytes)  tyk20.jpg (180382 bytes)  tyk17.jpg (184959 bytes)

Demag & other Bridge Cranes - Dust Collectors - Chubu-Koki CNC & Engine Lathes
Kato Model MC2 Material Cutter - (6) 25" Vibrating Tables w/Controls

tyk12.jpg (179562 bytes)  tyk9.jpg (128081 bytes)  tyk8.jpg (129810 bytes)  tyk7.jpg (172529 bytes)  tyk22.jpg (178225 bytes)

Vectrax Milling Machine - 2001 Atlas Copco 75hp & (2) Sullair 50hp & 75hp Air Compressors - (47) Totes

tyk10.jpg (163877 bytes)  tyk6.jpg (150646 bytes)  tyk3.jpg (139991 bytes)  tyk1.jpg (169548 bytes)  tyk24.jpg (186489 bytes)

(6) 410 Stainless Steel Crucibles - Target Masonry Saw - Swindel Dressler Kiln & Pre-heater (2 photos) - Pugmill

 


PDF of 6-Page TYK America, Inc. Auction Mailer

ISOSTATIC PRESS

ABB Metallurgy Cold Isostatic Press, Model: Quintus QIC 132, SN: L-8688.103, 22,050 PSI Cold Vessel Max. Pressure, Design Pressure: 2,844 PSI @ 68F; Cycles to Date: 65,000 of 150,000; Internal Vessel Dimensions: Diameter 1050mm - 50mm, Length: 250mm - 3250mm; (2) Hydro-Pac FX High Pressure Pumps, Model P30-20FX, S/N P93-1699-1, 30,000 psi; (5) Baskets - 9-1/2' High x 40" Diameter, Basket Wash Station, Controls, Etc.

(2) Demag 5-Ton & 2-Ton Overhead Bridge Cranes with Trolleys, I-Beams, 70' Span & 100' Runway
Hyde Products Oil Separator, Ultra Mini UF, S/N W41373, 1,500 Gallon Horizontal Water Tank with Weldmate Filter

(2) Custom 4-Bay Dryers, with Controls, Partlow Recorder - Low Temp - 170 Degree to 220 Degree and High Temp. 245 Degree to 270 Degree F

Allen Bradley Motor Control Center with (14) Disconnects.

MIXING DEPARTMENT

Kato Iron Works 40' High Skip Hoist Material Elevator with 5' Dia. x 7' High Hasokawa Micron Nauta Mixer and Reactor, Model NX-6, S/N 292437 - 600 lb. Capacity, 60, 3.7 KW Speed Reduction Drive, Fill Hopper, Pneumatic Discharge Gate Valve, PulseAire Baghouse Dust Collector with Pneumatic Bag Shaker and Controls.

Kato Iron Works Material Cutter, Model MC2, S/N 023909 with Hydraulic Pump and Reservoir, Guillotine Type.

RM Roll Crusher and Screening System, Model RMS50, 500 RPM, 1-Ton per hour, 10" Dia. x 42" Feed Hopper.

Kato Iron Works Screened and Product Incline Conveyor Elevator, Model VR-32. with Vibratory Feeder Leading to Elevator and Dual Product Grinders.

(3) Hot Mix Mixers, 48" x 40" x 30", with Twin Horizontal Kneaders, Shaft Driven Roller Bearings, 30 HP, with Bottom Mounted Gas Burner, Hydraulic Dumps, Including (2) L-Type and (1) M Type.

(3) Dust Collectior: Micro Pulseaire Bag House Dust Collector;

4-Compartment Bag House Dust Collector Temperature and Humidity Control Holding Cabinets, 23' x 4-Shelf High.

(6) Hydraulic Air Hammer Vibrating Tables, 25" Diameter, Pit Mounted Retractable Table with 8' Vertical Travels, with Controls

(4) 40" x 40" Bulk Ingredient Bins Including: (3) Carbon Steel Product Hoppers with Bottom Feed and Dual Compartment Carbon Steel Product Hopper with Bottom Feed

(47) Dry Mix Material Cans, Hot Mix Material Cans - 1,000 lb. Batches, & (11) Post Crusher Material Cans.

LATHES & MILLING MACHINE

Chubu-Koki CNC Lathe, Model CN75, S/N 1259, 36"Swing, 12 Bed, Cross-Feed Tailstock, Chip Shield, with Positech Parts Manipulator, Model: P78-81INPFDC; plus Chubu-Koki CN75 Lathe (Parts Machine)

Chubu-Koki Engine Lathe, Model: CU2500, S/N 276, 30" Swing, 8' Bed

Vectrax Milling Machine with Special Table: 72" x 12", Indexing Head, Digital Measuring System and Positech Parts Manipulator.

Dust Collector Baghouse Type with Bag Shaker, 4' x 12'

KILN & PRE-HEATER

Swindel Dressler Pre-Heater and Tunnel Kiln, 180'L Kiln, Operated at 2000F, 60'L Pre-Heater Operated at 1,250F, with After Burner, Cooling Zone, Natural Gas Fired, (28) Burners, Maximum Load Density: 20#/Ft (52) Cars, Transfer Cars and Return Controls, Burners and Chart Recorders.

(2) Square D Model 5 Motor Control Centers with (18) Disconnects and (12) Disconnects.

Reheat Furnace Kiln with Chart Recorder.

Demag 2-Ton Capacity Overhead Traveling Bridge Crane, 48' Span, Power Trolley, Cable Hoist, Floor Controls, 50' Runway, Etc.

(6) 410 S/S Crucibles including (2) 2" x 5-1/2' and (4) 6' x 2-1/2"

Japanese Spun Canning Machine, Hydraulic Operated with Positech Parts Manipulator.

AIR COMPRESSORS

2001 Atlas Copco GA55 Air Compressor, 75hp w/Electronikon Controls.

Sullair Model 16, 75 hp Air Compressor.

Sullair 50 HP Air Compressor, Model 12BS-50H ACAC, S/N 003-79138.

Atlas Copco CD170 Air Dryer; Miller Bilt Air Dryer.

Campbell and Hausfeld Vertical Air Compressor - 6.5 hp - 60 Gal.

ADDITIONAL MAJOR ITEMS

Fukai 300-Ton Friction Press.

(2) Muller 8' Dia. Magnesium Graphite Mixers.

(2) Bonnot 125 hp Pugmills with Vacuum Compressor.

(3) 100,000 lb. Friction Presses - (1) 50,000 Lb.

(2) 2-Compartment Lanco Pipe Dryers, Shells Only - No Burners.

(4) Product Bins with Vibratory Feeder.

Additional Items: Welding Carts, Torches, Cables, Drill Press, DC Socks, Forklift Parts and Metal Sweeper Radiant Heater, Pipe Threading Cutter; Bearings and Parts for AC; Mixers; Crushers; (2) Hoists, Yale and Others; Double End Grinder; Vertical Belt Sander; Inco Vertical Band Saw.
Assorted Machine & Woodworking Tools: DeWalt Radial Arm Saw, Delta 10" Contractors Saw, Shopsmith Band Saw, Shopsmith Jointer, Delta 500 RPM Lathe, Mixtmat Conyard Lathe, Bench Lathe, (2) Delta Drill Presses, (2) Delta Sanders, Porter Cable Shaper, More.
Fixtures & More: 12' Steel Top Table with 8" Vise, Parts, Racks, Carts, Steel Storage Racks and Steel Trays; Double End Grinder, 10' Steel Top Table with Vise and (14) Dump Hoppers; (5) Blower Units, Moyno Pump w/Reeves Drive.
Parts & Power Tools: Bearings, Seals, Hydraulics, Pressure Wash, Fisher Air Filters, V-Belts, Grinder Discs, Lube, Lights Bulbs, Electrical Boxes, Parts, (2) Sabre Saws, Pedestal Grinder, Pipe Cutters, Pigs, Wet/Dry Vac, Wet Saw, Dust Collector, Old Welders, Scale, Target Masonry Saw; More.

MATERIAL HANDLING & MORE

Hyster 80 - 8,000 lb. Propane Forklift with Enclosed Cab, Side Shift and 3-Stage Mast.

Hyster 35 3,500 lb. Propane Forklift, with Side Shift & 3-Stage Mast.

Clark Electric Pallet Jack; Manual Pallet Jack

(2) Philadelphia Tram Rail Co. 5-Ton Cranes, 30' Span x 60' Runway.

(2) Shaw Box 2.5 Ton Cranes - 30' Span, 80’ Runway.

Additional Equipment: (6) 60 hp Dual and Single Hydraulic Systems; (2) Ohaus Scales, Density/Porosity Tester, Bickley PCE Furnace, Model 697; Blue M Lab Heat Muffle Furnace; Fisher Mortar Grinder; Mettler Toledo S/S Scale; Modular Rupture Tester; Electric Balance; Orino Temperature Reader; Moisture Tester; Stirrer; pH Tester; Ohaus Moisture Tester, Induction Furnace; (2) PDH Ovens; Fisher Incubator; (2) 10’ x 4’ Propane Tanks; Jaw Crusher w/12' Belt Conveyor.


 


CopyofHDClogoWEB.gif (4120 bytes)

(800) 775-2289 (USA & Canada) - (412) 765-1170 - Fax (412) 765-0910

E-Mail: sales@harrydavis.com

Auction Calendar  |  Absentee Bidding Form Bank Letter of Approval Form

Revised 02/20/2007 - Copyright 2006 Harry Davis & Company